Paid drone assembly

Discussion in 'Misc. Quadcopter & Multirotor discussions' started by Andrey Welsh, Jul 18, 2018.

  1. Andrey Welsh

    Andrey Welsh New Member

    Hello,

    I'm looking for a drone harware store with some knowledgable and handy technical people that will assemble a Betaflight drone from the part that they sell. I will then need to be able to write a program that will control flight of the drone, and do some things in the air (be able to issue commands like "fly up 10 feet", "fly north (south, east, west) 5 feet", "land".) This has to be a ~4" drone without camera. I have to be able to control it from the ground using UWB radio (not GPS). The drone might need to have an LED light attached to it, and possibly being able to turn on/off from the ground.

    This project will potentially lead into purchase of hardware that will be used to assemble such drones, if we will be satisfied with the results. Please note that Flight Controller has to be F3 or F4 compatible, and it should be possible to flash latest Betaflight software to it.

    We are looking for a partnership to accomplish this task. Drone assembly will be paid as well as all necessary parts.

    Please, we are looking for someone who already has experience with Betaflight software.

    Get in touch with me for the details, if you're interested. Please do not write me if you don't work or related to a store that sells drone parts!
     
  2. Andrey Welsh

    Andrey Welsh New Member

    UPDATE!!!

    It's NOT necessary to just support UWB. For example, Wi-Fi is also good, other protocols are acceptible. MAYBE we can utilize another FC software, depending if Betaflight supports auto-pilot modes (getting controlled from the ground is also one of the important issues.)
     
  3. ryanolivas

    ryanolivas New Member

    Hi sir this is just an advice, Put a Gps tracker on your drone so that you can keep an eye to your drone at all time. :)
    Concerned citizen here;)
     
    Andrey Welsh likes this.

Share This Page