New Droner needs advice on telnet and abs cntrl

Discussion in 'AR Drone by Parrot' started by umby63, Apr 18, 2015.

  1. umby63

    umby63 New Member

    I just purchased an AR Drone 2.0 the other day. I'm addicted! But two issues:
    1. It seems to pop out of Absolute Control after a couple of minutes. I usually Flat Trim (before) and Calibrate (after lift off), but it keeps happening. Any tests or suggestions?
    2. Since it's new and since I'll undoubtedly break something, I telnet'd into it and dump the syslog.bin and messages file as a baseline reference for that day it won't boot up all the way. Any other suggestions, tips, or files to interrogate while I'm in there with telnet? (please specify path)
    3. I see other droners upgrading or downgrading their firmware, how do I discover mine and are there some buggy vers out there?
    4. Any other hints, tips, help or prayers you can suggest if you were to dial back the time machine and pull yours out of the box again would be greatly appreciated!
    Thanks for any help.
     

Share This Page