I have a brushless motor that i bought from Hobby king and for some reason when it doesnt have a propeller on it The motor spins perfectly. But as soon as i place a propeller on it and tighten it on it struggles. I have a video of both with and without propellers if anyone can help me out that would be fantastic. Its a project for my final at my school and really need to get this thing in the error and we have had so many problems. Here is the video without Propeller Here is the video with propeller Here is the type of motor im using http://www.hobbyking.com/hobbyking/store/__64889__NTM_Prop_Drive_Series_28_26_1100kv_252w_US_Warehouse_.html?strSearch=NTM Prop Drive 28-26 1100 Here is the ESC im using http://www.hobbyking.com/hobbyking/store/__15205__Hobby_King_30A_ESC_3A_UBEC.html The main board im using is an Arducopter APM 2.6 with a 6 channel remote controller
Without seeing a close up of the motor and prop I would say your prop is rubbing on the motor body.....add some space between the two.